You’ll now see your “setup” on the left hand side of the Production Manager.Click the drop down arrow for how your cutter is connected to the computer and select the same COM port number that you found in Device Manager and click Finish.Select Vinyl Express for the Manufacturer and the Model of your cutter.Open Production Manager, select Setup and choose Add Setup.Now that you know what port to select you’re ready to add your setup into the Production Manager. Click the arrow next to Ports to see the COM number.

With the driver installed and the adapter plugged into the computer, there should be a Ports options listed in Device Manager.

If using Windows 7, click the Start button and select Control Panel. Find Device Manager in the list and click to open it.

Select Device Manager from the expanded window.

In Windows 8, move your mouse to the bottom left corner of your screen and right-click.

Connect the adapter to the computer after the driver has been installed.

(The files must be extracted before the driver can be installed.) Check Device Manager

Then extract the files to a new folder and run the driver installer.

Save the file somewhere to your computer that you can find it or select open.Select and download the driver compatible with your operating system.Click “SOFTWARE, FIRMWARE & DRIVERS” found in the i n the left column.You can also download the driver for the Keyspan (USA-19HS) adapter from the. The driver will be on a disk that comes with the Keyspan adapter. You must install a driver for the adapter before you can successfully use it.These instructions will guide you through setting up the Keyspan adapter and then adding your setup into the LXi program. Both of these may be purchased through our or by calling SignWarehouse directly (800.699.5512). To connect a serial driven device to a computer that only has USB ports, users will need a USB-to-serial adapter along with a null serial cable. We recommend using the Keyspan brand USB to serial adapter.Īlso, if the serial cable is not a Null cable, it will not work.

Some vinyl cutters require a serial connection which is, unfortunately, unavailable on most modern computers (especially laptop). CAMM-1 Pro Series GX-500 50' Vinyl Cutter technical support page such as support articles, support guides, software updates, firmware, drivers and manuals. Manufacturer and the Model of your cutter. To connect a serial driven device to a computer that only has USB.

Roland cutting plotter usb driver dow